Ear phone damaged? dont worry,can be repaired

You can easily repire your earphone

The ear phones are available in the market at low and high costs
If you do not used it carefully, low price earphones  will get damaged easily

If they were folded in pockets and bags,it will get damaged at one side or both sides.
Usually the disconnection from the jack plugbe the reason of  the problem.
The problem can be solved by soldering the connections.

For this you should know some basics
There are two types of earphones. with and without mic
So you should findout the type of jackplug,you can see two types of jackplugs in the given picture

If earphone has a mic ,the rings are four .if there is no mic ,the pins are three.

The rings are named  Tip,ring 1,ring2,sleeve
If you cut the wire,you can see four (3 in no mic)wires with color codes

It denotes left speaker,right speaker,mic and ground

Methodes to find out the  wires

Usually,the wire of left speaker is green
Right speaker is red
Mic will be combination of any two colors
Ground is always in golden color

Otherwise,
Connect terminals of any wires and ground with a battery.if you hears any sounds,you can confirm that is a speaker connection.
If it is a mic connection ,there is no sounds

Soldering

The soldered region can be covered with mceal or any other insulations

1.left
2.right
3.mic
4.ground

Facing problem with airtel 3G activation :solved

Are you facing problem with airtel 3G activation?
Your device is not access with 3G network.only 2G,huh;

Don't worry. i am here!

Are you tired with sending sms 3G to 121 and phone to customercare.
It does not works sometimes. it is irresponsible.

I will give you a good solution for this issue.

JUST FOLLOW ME,

1)first you need to install my airtel(2.3)

Go to dowload page

2)open the application

3) select home

4) select 3G

5) click on activate 3G

6) you will recieve an sms as,

  "   Thank you for your request. 3G services will be activated within 30Min. You will receive a confirmation sms on activation of the services.Post activation, to choose your 3G data plan, please send 3G to 121 again.Once 3G services are activated, please select Dual network mode/Auto mode/2G & 3G mode in your phone network settings to latch onto 3G network   "

7) select WCDMA only or HSPA from phone settings.

8) wait for 30 mins.if it is not activated try it again and again.

 You can access 3G within 3 attempts.